django安裝

進入到Python3.5環境

source /py3env/bin/activate

安裝django

(py3env) [root@localhost ~]# pip install django==1.10.6
(py3env) [root@localhost ~]# python
Python 3.5.0 (default, May 14 2016, 00:40:36) 
[GCC 4.8.5 20150623 (Red Hat 4.8.5-4)] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import django
>>> print(django.get_version)
<function get_version at 0x7fabbc4c3ea0>
>>> print(django.get_version())
1.10.6
>>> quit()

創建項目

(py3env) [root@localhost Django]# django-admin startproject blogproject
(py3env) [root@localhost Django]# cd blogproject/

訪問控制

(py3env) [root@localhost blogproject]# vim blogproject/settings.py 
    ALLOWED_HOSTS = ['*']

修改語言與時區

(py3env) [root@localhost blogproject]# vim settings.py
    LANGUAGE_CODE = 'zh-hans'
    TIME_ZONE = 'Asia/Shanghai'

啟動服務

(py3env) [root@localhost blogproject]# python manage.py runserver
Performing system checks...

System check identified no issues (0 silenced).

You have 13 unapplied migration(s). Your project may not work properly until you apply the migrations for app(s): admin, auth, contenttypes, sessions.
Run 'python manage.py migrate' to apply them.

May 24, 2016 - 07:50:35
Django version 1.10.6, using settings 'blogproject.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CONTROL-C.

修正啟動報錯

(py3env) [root@localhost blogproject]# python manage.py migrate

依舊無法訪問

(py3env) [root@localhost blogproject]# python manage.py runserver 0.0.0.0:8000
Performing system checks...

System check identified no issues (0 silenced).
May 24, 2016 - 08:47:06
Django version 1.10.6, using settings 'blogproject.settings'
Starting development server at http://0.0.0.0:8000/
Quit the server with CONTROL-C.
Invalid HTTP_HOST header: '192.168.200.113:8000'. You may need to add '192.168.200.113' to ALLOWED_HOSTS.
[24/May/2016 08:49:05] "GET / HTTP/1.1" 400 61230

查看端口對應程序

[root@localhost ~]# ss -auntlp 
Netid State      Recv-Q Send-Q  Local Address:Port    Peer Address:Port   
udp   UNCONN     0      0                   *:59585              *:*        users:(("dhclient",pid=88339,fd=20))
udp   UNCONN     0      0                   *:68                 *:*        users:(("dhclient",pid=88339,fd=6))
udp   UNCONN     0      0                  :::19187             :::*        users:(("dhclient",pid=88339,fd=21))
tcp   LISTEN     0      128                 *:22                 *:*        users:(("sshd",pid=1439,fd=3))
tcp   LISTEN     0      100         127.0.0.1:25                 *:*        users:(("master",pid=2198,fd=13))
tcp   LISTEN     0      10          127.0.0.1:8000               *:*        users:(("python",pid=93626,fd=7))
tcp   LISTEN     0      128                :::22                :::*        users:(("sshd",pid=1439,fd=4))
tcp   LISTEN     0      100               ::1:25                :::*        users:(("master",pid=2198,fd=14))

添加防火墻規則

(py3env) [root@localhost blogproject]# firewall-cmd --zone=public --add-port=80/tcp --permanent
--zone #作用域
--add-port=80/tcp  #添加端口，格式為：端口/通訊協議
--permanent   #永久生效，沒有此參數重啟后失效
(py3env) [root@localhost blogproject]#firewall-cmd --reload

查看所有服務

(py3env) [root@localhost blogproject]# systemctl --type=service
  UNIT                                   LOAD   ACTIVE SUB     DESCRIPTION
  auditd.service                         loaded active running Security Auditing Service
  crond.service                          loaded active running Command Scheduler
  dbus.service                           loaded active running D-Bus System Message Bus
  [email protected]                     loaded active running Getty on tty1

依舊無法訪問后手動指定監聽

(py3env) [root@localhost blogproject]# python manage.py runserver 0.0.0.0:8000
Performing system checks...

System check identified no issues (0 silenced).
May 24, 2016 - 16:56:22
Django version 1.10.6, using settings 'blogproject.settings'
Starting development server at http://0.0.0.0:8000/
Quit the server with CONTROL-C.
[24/May/2016 16:56:25] "GET / HTTP/1.1" 200 1774

對比監控端口變成（*：8000）

    Netid State      Recv-Q Send-Q  Local Address:Port   Peer Address:Port 
udp   UNCONN     0      0                   *:59585             *:*    users:(("dhclient",pid=88339,fd=20))
udp   UNCONN     0      0                   *:68                *:*    users:(("dhclient",pid=88339,fd=6))
udp   UNCONN     0      0                  :::19187            :::*    users:(("dhclient",pid=88339,fd=21))
tcp   LISTEN     0      128                 *:22                *:*    users:(("sshd",pid=1439,fd=3))
tcp   LISTEN     0      100         127.0.0.1:25                *:*    users:(("master",pid=2198,fd=13))
tcp   LISTEN     0      10                  *:8000              *:*    users:(("python",pid=94029,fd=8))
tcp   LISTEN     0      128                :::22               :::*    users:(("sshd",pid=1439,fd=4))
tcp   LISTEN     0      100               ::1:25               :::*    users:(("master",pid=2198,fd=14))

再訪問

這里寫圖片描述

本文鏈接：https://blog.csdn.net/u012700515/article/details/78980253

智能推薦

Django安裝步驟（pycharm）

Django安裝步驟（pycharm） 1.創建Django項目 db沒有顯示紅色x說明創建成功了 2.安裝插件界面左下角有一個Terminal，點開就是一個命令行控制臺，可以輸入命令查看Django版本信息，可以看出pycharm創建Django安裝的是2.1.1的版本 2.1.安裝Django1.11.12版本目前支持比較好的為1.11.12，所以可以安裝1.11.12(安裝過程中會自動...

Mac os 安裝Django

Mac os下Python3安裝Django 1.查看pip版本沒有的話就是沒安裝成功安裝python的時候一般會自動安裝pip 2.用pip3/Python3安裝Django，1.11.7是最新穩定版(官網download頁面有 https://www.djangoproject.com/download ) 這里注意用sudo 不然會報錯提示：...

Django安裝爬坑

環境介紹需要的文件版本介紹 python安裝 Python官網自行安裝相應版本操作步驟 https://jingyan.baidu.com/article/3ea51489bebde652e61bbad3.html Django安裝細節創建目錄目錄說明運行訪問...

HTML中常用操作關于：頁面跳轉，空格

1.頁面跳轉 2.空格的代替符...

freemarker + ItextRender 根據模板生成PDF文件

1. 制作模板 2. 獲取模板，并將所獲取的數據加載生成html文件 2. 生成PDF文件其中由兩個地方需要注意，都是關于獲取文件路徑的問題，由于項目部署的時候是打包成jar包形式，所以在開發過程中時直接安照傳統的獲取方法沒有一點文件，但是當打包后部署，總是出錯。于是參考網上文章，先將文件讀出來到項目的臨時目錄下，然后再按正常方式加載該臨時文件；還有一個問題至今沒有解決，就是關于生成PDF文件...